Do You Know Your Trackit?

When turning on the Trackit, this is what you should see on the LCD display:

Trackit display in standby mode:

1. Current time (in military format)

2. Battery life remaining

3. Elapsed time during recording (displays '0' when in standby mode)

4. Remaining memory on the CF card in the Trackit (in megabytes)

5. Bluetooth mode (capital 'B') 

 

Press the event button five times to change from Bluetooth to non-Bluetooth mode.

Non-Bluetooth mode: Beta symbol 

Note: Non-Bluetooth mode is used when connected with the MK3 cable.

 

 

Trackit display in record mode:

1. Current time (in military format)

2. Battery life remaining

3. Elapsed time during recording (in hours:minutes)

4. Remaining memory on the CF card in the Trackit (in megabytes)

Note: You should see a capital 'R' next to the remaining memory on the CF card. This means that the Trackit is currently recording. If you do not see the capital 'R', the recording has not been initiated properly.

5. Patient event button (press to mark an event)

 

 

Search